Manual Choke
Well, this post is a little late! I previously had an automatic heat choke that used heat from the exhaust to open and close the choke. This wasn’t working properly, so I decided to switch to a manual choke at the beginning of April. There were lots of little parts and no diagrams, so I was a little intimidated at first, but my disassembly of the automatic choke provided enough information about how it went together that I didn’t need any diagrams.
With the automatic choke, I had trouble starting up the Mustang, and sometimes had to start it two or three times and feather the gas to keep it running. With the manual choke, she starts up much easier now, and especially with the weather warming up. Success!
Other than that, I’ve been much too busy with school to do any other work, unfortunately. This summer I’ll get some things done for sure though!